{"product_id":"velocityap-lowering-springs-mclaren-570s-570gt-540c","title":"VelocityAP Lowering Springs McLaren 570S \/ 570GT \/ 540C","description":"\u003cp\u003e\u003cspan\u003eEnhance the stance, handling, and driving experience of your McLaren 540C, 570S, or 570GT with the Velocity AP Progressive Rate Lowering Springs. Engineered specifically for McLaren's Sports Series platform, these premium lowering springs reduce ride height by approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e22mm (7\/8 inch)\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e while maintaining the balance of performance and ride comfort expected from a McLaren.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe factory suspension on the McLaren Sports Series delivers exceptional handling, but the original ride height can leave a noticeable gap between the tires and wheel arches. Velocity AP addresses this with a carefully engineered lowering spring kit that creates a more aggressive stance while retaining the vehicle's factory suspension architecture.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnlike conventional lowering springs that utilize constant-diameter wire, Velocity AP incorporates an advanced \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etapered-wire progressive-rate design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. This construction allows the spring rate to increase progressively as the suspension compresses, providing a compliant response during everyday driving and greater resistance during aggressive cornering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe result is improved suspension support under load without the excessively harsh ride associated with some traditional performance springs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach spring is manufactured using \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehigh-strength X5K spring steel\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, a premium material selected for its strength, durability, and reduced weight. This advanced steel allows Velocity AP to achieve the required spring characteristics while using less material than conventional spring designs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAccording to Velocity AP, its X5K construction produces springs that are approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e30% lighter than conventional original spring designs\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Reducing spring mass can help improve suspension responsiveness while maintaining the durability required for high-performance applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe tapered-wire design also reduces the spring's fully compressed height, helping preserve usable suspension travel despite the lower ride height.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAnother advantage of Velocity AP's progressive-rate construction is its compatibility with the factory shock absorbers. As the suspension extends, the spring rate decreases, helping the dampers maintain effective rebound control. During compression, the spring rate progressively increases to provide additional support when cornering or encountering greater suspension loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis design is intended to improve vehicle stability, reduce unwanted body movement, and deliver more predictable suspension behavior.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e22mm lowering\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e creates a noticeably more aggressive appearance by reducing wheel gap and enhancing the McLaren's factory body lines. The lower stance also complements aftermarket wheels and wheel spacers for owners seeking a more personalized appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBeyond aesthetics, the revised spring characteristics are designed to improve handling response and cornering stability while maintaining comfortable operation during normal driving.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVelocity AP developed this kit specifically for the McLaren 540C, 570S, and 570GT, making it an excellent option for owners who want to improve their vehicle's stance without replacing the factory dampers or installing a complete aftermarket coilover system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're refining the appearance of a 570S Coupe, lowering a 570GT, or enhancing the handling characteristics of a 540C, the Velocity AP Progressive Rate Lowering Springs deliver a balanced combination of performance, ride quality, and aggressive styling.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFitment Notes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMcLaren 540C\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMcLaren 570S Coupe\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMcLaren 570S Spider\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, subject to vehicle-specific confirmation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMcLaren 570GT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEngine: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e3.8L Twin-Turbocharged V8\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDesigned for compatible McLaren Sports Series factory suspension configurations\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFront lowering: approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e22mm (7\/8 inch)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRear lowering: approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e22mm (7\/8 inch)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eProgressive-rate tapered-wire spring design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDesigned to work with compatible factory shock absorbers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFactory suspension architecture is retained\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFactory nose lift compatibility should be verified for the specific vehicle before ordering\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eActual ride-height reduction may vary based on factory suspension equipment and vehicle condition\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNot confirmed for McLaren 600LT\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNot intended for McLaren MP4-12C or 650S\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNot intended for McLaren 720S, 750S, or 765LT\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNot intended for McLaren GT\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFour-wheel alignment recommended following installation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eVerify tire-to-fender, suspension, and underbody clearance after lowering\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eProfessional installation recommended\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eIncluded\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eTwo Velocity AP progressive-rate front lowering springs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eTwo Velocity AP progressive-rate rear lowering springs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTotal: Four Lowering Springs\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eProduct Specs\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eManufacturer: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eVelocity Automotive Performance (Velocity AP)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eProduct Name: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMcLaren 540C \/ 570S \/ 570GT Progressive Rate Lowering Springs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eManufacturer SKU: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eVEL-Mclaren570Springs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eVehicle Application: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMcLaren 540C \/ 570S \/ 570GT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEngine: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e3.8L Twin-Turbocharged V8\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eProduct Type: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eLowering Spring Kit\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSpring Design: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eTapered-Wire Progressive Rate\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSpring Material: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eHigh-Stress X5K Spring Steel\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFront Lowering: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e22mm \/ 7\/8 Inch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRear Lowering: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e22mm \/ 7\/8 Inch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eManufacturer-Claimed Spring Weight Reduction: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eApproximately 30%\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFactory Shock Absorber Compatibility: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDesigned for OEM Suspension\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRide-Height Adjustability: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFixed Lowering\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNumber of Springs: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFour\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eManufacturer-Listed Shipping Weight: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e22 lb\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eManufacturer-Listed Package Dimensions: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e24 × 15 × 5 in\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eProduct Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e22mm (7\/8-inch) lowering\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e reduces wheel gap and creates a more aggressive stance for the McLaren 540C, 570S, and 570GT.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eAdvanced tapered-wire progressive-rate design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e provides a compliant ride during normal driving and increased spring resistance during aggressive cornering.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePremium X5K spring steel construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e delivers excellent strength and durability with approximately 30% less spring weight according to Velocity AP.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImproved handling and suspension control\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e helps reduce unwanted body movement while enhancing stability and responsiveness.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDesigned for factory suspension compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e allows owners to retain the original shock absorbers without installing a complete aftermarket coilover system.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eReduced compressed spring height\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e helps preserve usable suspension travel while delivering a lower ride height.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VelocityAP","offers":[{"title":"Default Title","offer_id":68048863134016,"sku":"VEL-Mclaren570Springs","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/7587\/4624\/files\/products-VEL-Mclaren570Springs-2.png?v=1793978221","url":"https:\/\/www.forzamotorworks.com\/products\/velocityap-lowering-springs-mclaren-570s-570gt-540c","provider":"Forza Motor Works","version":"1.0","type":"link"}