Unlock additional performance from your Porsche 991.2 GT3 or GT3 RS with Softronic Performance ECU Software. Developed specifically for Porsche's naturally aspirated 4.0L direct-injection flat-six engine, this ECU calibration optimizes engine management to increase horsepower, torque, and overall engine responsiveness.
For the 991.2 GT3, Softronic advertises an increase from 493 bhp to 523 bhp, delivering an additional 30 horsepower. Peak torque increases from 339 lb-ft to 351 lb-ft, representing a gain of 12 lb-ft.
For the 991.2 GT3 RS, Softronic advertises an increase from 513 bhp to 540 bhp, delivering an additional 27 horsepower. Peak torque increases from 347 lb-ft to 359 lb-ft, representing a gain of 12 lb-ft.
Designed to complement the high-revving character of Porsche's GT3 engines, Softronic Performance Software refines engine calibration to provide stronger acceleration and improved power delivery while preserving the naturally aspirated driving experience.
The software is developed and tested using 93-octane fuel, with published performance figures representing typical gains on stock vehicles. Actual results may vary depending on vehicle condition, fuel quality, environmental conditions, and installed modifications.
Softronic also offers additional calibration options, including free revving in neutral, manual-transmission RPM adjustments, speed limiter modifications, and custom tuning through data logging when required. Certain features may require additional programming and are intended exclusively for competition applications.
The tuning package includes an OBD-II programming cable and Softronic flashing software, allowing the vehicle's ECU to be programmed through its diagnostic port. The software license is tied to a single vehicle's VIN and cannot be transferred between vehicles.
For Porsche 991.2 GT3 and GT3 RS owners seeking increased horsepower, improved torque delivery, and enhanced engine response without major mechanical modifications, Softronic Performance ECU Software provides a comprehensive engine management upgrade.
Fits 2018–2019 Porsche 911 GT3 (991.2) with the 4.0L naturally aspirated flat-six
Fits 2019 Porsche 911 GT3 RS (991.2) with the 4.0L naturally aspirated flat-six
Softronic lists this product for 2018+ 991.2 GT3 and GT3 RS applications
GT3 and GT3 RS require their respective vehicle-specific ECU calibrations
Not compatible with 991.1 GT3 or GT3 RS applications
Not compatible with Porsche 992-generation GT3 or GT3 RS
Published performance figures are based on stock vehicles using 93-octane fuel
Vehicles with aftermarket intake, exhaust, or engine modifications may require additional calibration
Software license is restricted to one vehicle and tied to its VIN
Optional calibration features may require additional programming
Confirm ECU compatibility and programming requirements before ordering
Verify local emissions regulations and intended use before installation
Softronic performance ECU calibration for the selected vehicle
OBD-II programming cable
Softronic ECU flashing software
Single-vehicle VIN-linked software license
Manufacturer: Softronic Software
Product Type: Performance ECU Tuning Software
Vehicle Application: Porsche 911 GT3 / GT3 RS (991.2)
Model Years: 2018–2019, Model Dependent
Engine: 4.0L Naturally Aspirated Flat-Six
GT3 Factory Horsepower: 493 bhp
GT3 Tuned Horsepower: 523 bhp
GT3 Advertised Horsepower Gain: +30 bhp
GT3 Factory Torque: 339 lb-ft
GT3 Tuned Torque: 351 lb-ft
GT3 Advertised Torque Gain: +12 lb-ft
GT3 RS Factory Horsepower: 513 bhp
GT3 RS Tuned Horsepower: 540 bhp
GT3 RS Advertised Horsepower Gain: +27 bhp
GT3 RS Factory Torque: 347 lb-ft
GT3 RS Tuned Torque: 359 lb-ft
GT3 RS Advertised Torque Gain: +12 lb-ft
Fuel Used for Published Results: 93 Octane
Programming Method: OBD-II Flashing
Software License: Single Vehicle / VIN-Locked
Custom Data-Logging Calibration: Available When Required
Up to 30 horsepower increase raises manufacturer-advertised output to 523 bhp for the GT3 and 540 bhp for the GT3 RS.
Improved torque delivery provides an additional 12 lb-ft for both models.
Vehicle-specific ECU calibration is developed for the Porsche 991.2 GT3 and GT3 RS naturally aspirated 4.0L engines.
Convenient OBD-II programming includes the necessary cable and flashing software for compatible vehicles.
Optional performance calibration features may include free revving in neutral, manual-transmission RPM adjustments, and other vehicle-specific settings.
Custom tuning capability allows additional calibration through data logging when required for modified vehicles.
!